The APART CM20T dual-band wall-mounted speaker can be used in a 16-ohm or 100-volt system. With 16 ohms, up to 4 speakers can be connected in parallel in each standard 4-ohm amplifier channel. For 100 volt use, the CM20T is equipped with a high quality 20 watt 100 volt transformer with multiple power pressures. Therefore, it can be used in projects with high ceilings or in places with background noise where slightly more power is required.
APART MASK8F is an installation speaker that provides HI-FI sound quality. The MASK8F speaker has a dual-band 8-inch bass driver and a 1-inch silk dome beep.
Acoustic Energy speaker stand. Designed for AE1 Active, 100 and 300 series shelf / stand speakers.
The REGA AURA MC is a high-end phono preamplifier designed to amplify the MC head signal to the linear input level of virtually any Hi-Fi amplifier.
The Aura MC is a 3-stage symmetrical preamplifier with numerous adjustment and adjustment options. It's designed to get the best performance out of your MC head and the entire turntable.
This phono preamp will be perfectly compatible with Rega MC heads - Ania, Ania Pro, Apheta, Aphellion.
The APART CM1008 dual-band wall-mounted speaker can be used with a standard hi-fi or professional amplifier.
The CM1008 has a 1-inch beep and an 8-inch polypropylene bass driver that makes the speaker moisture-resistant.
The AE320 is a new slim-line floor-standing loudspeaker with compact dimensions, suitable for medium to large sized rooms.
SONY MDR-RF895RK over-the-ear wireless headphones are designed for use with a TV. These headphones have a built-in noise isolation system for clearer sound quality and automatic adjustment for high transmission quality.
The REGA FONO MC is a high-quality phono preamplifier specifically designed to maximize the sound potential of any MC head.
The Fono MC is specially complemented by microswitches (on the rear panel), which make it possible to fine-tune the frequency response of virtually any MC head and its signal level.
A pair of CABASSE RIGA 2 SPEAKERS ON STAND speakers based on a floor stand will be able to fill your room with a pleasant sound. The elegant design of the speakers and stand will be able to fit anywhere in the room of your choice. Its 17 cm BC13 driver is ideal for listening to music or enjoying movies.
CABASSE THE PEARL high quality wireless speaker system will ensure a pleasant listening experience. The unique design of the speaker will be able to fit unobtrusively into any room. The speaker's 25 cm subwoofer will deliver rich and dynamic sound.
The APART MA30 is a compact 9 1/2 inch mixing amplifier. This amplifier is both easy to install and easy to use.
The APART OVO5T installation speaker can be used both indoors and outdoors (coated only). The OVO5T speaker can be used as a 100V system with multiple power modes (30 - 15 - 6 - 3 watts). This speaker generates 80 watts of dynamic power at 16 ohms.
The APART REVAMP1120T is a single channel professional power amplifier. This amplifier does not have a fan, so it is quiet. The REVAMP1120T amplifier is easy to install.
APART MA240 is a mixing amplifier, which is also a 100V system. This amplifier is both easy to install and easy to use.
The DALI MENUET cinema speaker is a very compact speaker, providing great sound in a compact size. For optimal performance, DALI MENUET speakers should be placed on a bookshelf or attached to a wall using a wall mount. With two inserts on the back of the case, it is prepared for installation of a wall bracket for a hotel without undue difficulty. The bracket is designed to provide an optimal gap between the wall and the bass reflex port.
Recent polls show that for many people, radio is still their favorite entertainment throughout the day. The R1S takes this timeless medium to a new level, but with built-in Wi-Fi and Bluetooth, the Ruark R1S is more than just a radio.
The Yamaha NS-555 is a floor-standing speaker that can handle both movie audio tracks and music playback.
High sensitivity and wide dynamic range for modern digital sources.
The built-in horn allows you to create and control a sound field for optimal, surround sound in a home theater environment.
The REGA RP8 is a separately available replacement disc for the REGA RP8 vinyl player.
The Ruark R2 is designed to fit easily into your living space and give you maximum enjoyment of music.
For outdoor systems requiring more output, the Klipsch KDA-1000 DSP Amplifier powers larger arrangements to deliver incredible performance from a 1000W, single-rack unit solution - all completely customizable through the web-based DSP menu.
The APART P60DT ceiling-mounted speaker features a dual-band 6 1/2-inch subwoofer for excellent sound quality. The P60DT speaker is also a 100V system at 16 ohms and has several power modes (60 - 30 - 15 - 7.5 watts).
The APART KUBO3T installation speaker has a 3-inch full-range bass driver with bass reflex. The KUBO3T can also be used as a 100V system or a 16-ohm speaker that provides up to 40 watts of dynamic power.
The APART CM20T dual-band wall-mounted speaker can be used in a 16-ohm or 100-volt system. With 16 ohms, up to 4 speakers can be connected in parallel in each standard 4-ohm amplifier channel. For 100 volt use, the CM20T is equipped with a high quality 20 watt 100 volt transformer with multiple power pressures. Therefore, it can be used in projects with high ceilings or in places with background noise where slightly more power is required.
