The ATH-M50xBT Wireless Over-Ear Headphones - harnesses the legendary M50x studio sound for an exhilarating wireless listening experience, with exceptional clarity and deep, accurate bass response.

The closed-back, over-ear design of the M50xBT provides excellent passive isolation to keep out exterior noise. Up to 40 hours of continuous use on a full charge.

The ATH-ANC300TW QuietPoint® in-ear headphones strike the perfect balance between comfort, convenience, and performance, delivering best-in-class sound quality and noise-cancellation in a compact, truly wireless design. QuietPoint® digital hybrid noise-cancelling technology reduces ambient noise like no other. Qualcomm cVc™ (Clear Voice Capture) technology ensures clear, natural-sounding phone conversations. 

The ATH-CKS5TW in-ear headphones with Bluetooth® 5.0 technology pair powerful, high-fidelity sound with the convenience and freedom of a truly wireless design.

The thin, flexible eartips and 3D loop supports are designed to keep the music in your ears. Qualcomm cVc™ (Clear Voice Capture) technology ensures clear, natural-sounding phone conversations.

Portable charging case gives you an additional 30 hours of on-the-go power.

The ATH-A2000Z Art Monitor® closed-back dynamic headphones feature proprietary large-aperture 53 mm drivers to deliver exquisite Hi-Res Audio reproduction. OFC-7N bobbin-wound voice coils for ultra-efficient signal transmission, a pure iron yoke for superior transient response, and a top-mounted PCB for smoother airflow that enables precise diaphragm movement.

The housings of the ATH-A2000Z are crafted from rigid, pure-titanium housings and incorporate a lightweight magnesium alloy baffle to reduce unwanted resonance. The housings also feature Audio-Technica’s Double Air Damping System (D.A.D.S) for deep, natural-sounding bass reproduction. The auto-adjusting fit of A-T’s improved 3D wing support system adds to the comfort, allowing you to listen to the headphones’ pure, high-resolution audio for hours on end.

The ATH-A1000Z Art Monitor® closed-back dynamic headphones feature proprietary large-aperture 53 mm drivers to deliver exquisite Hi-Res Audio reproduction. The hand-assembled drivers include OFC-7N bobbin-wound voice coils for ultra-efficient signal transmission, a pure iron yoke for superior transient response, and a top-mounted PCB for smoother airflow that enables precise diaphragm movement.

The housings of the ATH-A1000Z are crafted from high-rigidity aluminum and incorporate a lightweight magnesium alloy baffle to reduce unwanted resonance. The housings also feature Audio-Technica’s Double Air Damping System (D.A.D.S) for deep, natural-sounding bass reproduction. The auto-adjusting fit of A-T’s improved 3D wing support system adds to the comfort, allowing you to listen to the headphones’ pure, high-resolution audio for hours on end.

The ATH-A550Z Art Monitor® closed-back dynamic headphones incorporate proprietary large-aperture 53 mm drivers with CCAW bobbin-wound voice coils to deliver audiophile-quality acoustic performance with linear frequency response. The drivers also feature a top-mounted PCB, which contributes to smoother airflow for precise diaphragm movement. Audio-Technica’s improved 3D wing support system provides an excellent, comfortable fit, aided by the headphones’ soft, premium-grade earpads. The 3.0 m (9.8') tangle-free cable is cloth-wrapped for lasting durability.

The ATH-A990Z Art Monitor® closed-back dynamic headphones feature proprietary large-aperture 53 mm drivers with OFC bobbin-wound voice coils to deliver Hi-Res Audio reproduction. The drivers’ integrated yoke and top-mounted PCB contribute to the high-resolution performance by providing superior transient response and smoother airflow for precise diaphragm movement. The lightweight aluminum housings reduce unwanted resonance and incorporate Audio-Technica’s Double Air Damping System (D.A.D.S) for deep bass reproduction. A-T’s improved 3D wing support system ensures a great, comfortable fit, aided by the headphones’ soft, premium-grade earpads. The 3.0 m (9.8') tangle-free cable is cloth-wrapped for lasting durability.

The ATH-AD2000X open back headphones offer a superlative listening experience. Feather-light and incredibly comfortable, these headphones gives you hours of stunning stereo listening, without fatigue. The large 53mm aperture drives on the headphones are based around Audio-Technica’s bobbin-wound CCAW voice coils that regenerate the audio signal with crisp resolution and a deep, balanced bass.

The ATH-AD2000X headphones excel at accurately reproducing classical and audiophile materials. These headphones are designed with lightweight aluminium honeycomb casings, which ensure absolute comfort for long periods of wear. The unique 2-part headband has self-adjusting wings which exert little pressure and absolutely no force on the crown of your head, maintaining an immersive, enjoyable listening experience.

Designed for incredibly comfortable listening. With a lightweight honeycomb aluminum casing and magnesium frame structure, these open-air headphones produce no sense of pressure on the ears, offering a completely natural listening experience. Newly designed 53 mm drivers with CCAW voice coils reproduce remarkably natural sound, with impactful bass and outstanding vocal projection. The self-adjusting wing support automatically adjusts to your head size. A straight OFC cable at the left earpiece terminates to a mini plug with included ¼" adapter.

With a lightweight honeycomb aluminum casing, these open-air headphones produce no sense of pressure on the ears, offering a completely natural listening experience. Newly designed 53 mm drivers with bobbin-wound CCAW voice coils deliver spacious sound with superior highs and mids. The self-adjusting wing support automatically adjusts to your head size for easy-wearing listening comfort. A straight cord at the left earpiece terminates to a mini plug with included ¼" adapter

The ATH-AD900x features large 53 mm drivers exclusively designed for the headphones, with rare-earth magnets and Audio-Technica’s copper-clad aluminum-wire (CCAW) voice coil technology for superior audio reproduction with an extremely wide 5 Hz – 35,000 Hz frequency response. The ATH-AD900x offers an immersive listening experience with clear, natural vocal and instrumental reproduction, a smooth tonal balance, precise imaging and superlative dynamic range.

The headphones offer a uniquely comfortable fit thanks to their generously cushioned ear pads, lightweight honeycomb aluminum casing and exclusive 3D Wing Support Housing, which adjusts itself perfectly to each wearer.

A landmark in open-back headphone performance, the ATH-ADX5000 provides a new reference in home listening audio, blending Japanese craftsmanship with Audio-Technica’s pursuit for perfect sound.

With newly developed core-mount technology, enlarged 58mm integrated driver units, tungsten coated diaphragm all encompassed behind a honeycomb punched design, this flagship headphone marks a culmination of the latest in audiophile listening.

Well known for its durability, Alcantara material is used on the earpads and headband to deliver outstanding wearing comfort for an extended home listening experience. Made of PPS (Polypenylene Sulfide) / glass fibre, the baffle is highly rigid to provide stable movement of the diaphragm.

The ATH-AP2000Ti over-ear headphones feature proprietary large-aperture 53 mm drivers, a permendur magnetic circuit, and diaphragms with a diamond-like carbon (DLC) coating, enabling them to deliver exquisite, full-range audio, including the capacity to reproduce Hi-Res Audio. The headphones also utilize Core Mount Technology that optimally positions the driver unit within the housing to improve airflow efficiency. The efficient airflow helps the headphones reproduce highly transparent mid and high frequencies and rich, precise bass sound.

High-fidelity, large-driver headphones with anti-vibration aluminium housings for outstanding sound for home audio and video systems. Enjoy the full range of sound from the dynamic to the most delicate.

Open-back headphones with self-adjusting headband support mechanism - suitable for hours of use with home audio and video systems. Offers full, high-quality sound.

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.

Headphones deliver accurate audio and outstanding comfort, perfect for long sessions in the studio and on the go. Contoured earcups seal tight for excellent sound isolation, with minimal bleed. And the pro-grade materials are durable, yet comfortable. Find out why online reviewers, top audio engineers, and cult followers agree, M-Series is an unmatched combination of audio and build-quality that gets the job done.

The M-Series ATH-M30x professional monitor headphones combine modern engineering and high-quality materials to deliver a comfortable listening experience, with enhanced audio clarity and sound isolation. Tuned for highly detailed audio, with strong mid-range definition, these versatile monitoring headphones are ideal in a variety of situations. Designed primarily for studio tracking and mixing, they offer added features for increased portability, making them a great choice for field recording.

The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring.

Designed for studio, broadcast and mobile applications, the ATH-M60x on-ear professional monitor headphones utilize the same proprietary 45 mm large-aperture drivers found in the legendary ATH-M50x headphones, delivering exceptional clarity throughout an extended frequency range with accurate bass response. 

The ATH-M70x professional studio monitor headphones feature proprietary 45 mm large-aperture drivers and are tuned to accurately reproduce extreme low and high frequencies (5 to 40,000 Hz) while maintaining perfect balance. They are ideal for studio mixing and tracking, FOH, DJing, mastering, post-production, audio forensics and personal listening. Crafted for lasting durability, the studio headphones provide excellent sound isolation and are equipped with 90° swiveling earcups for easy, one-ear monitoring.

The ATH-R70x is Audio-Technica’s first pair of open-back reference professional headphones. Together with the ATH-M70x, they stand as a flagship model in A-T’s lineup of professional studio headphones. Featuring specially designed drivers and acoustically transparent housings fashioned from aluminum honeycomb mesh, these headphones provide an accurate and natural open-back sound. They also incorporate a new, improved design of our popular 3D wing support system to provide even greater comfort during the prolonged use often required in professional settings.

Audio-Technica updates the PRO5 line with the ATH-PRO5X professional DJ monitor headphones. Featuring lightweight, sturdy construction and two interchangeable, locking cables – a 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and 1.2 m (3.9') straight cable – the ATH-PRO5X headphones are designed to stand up to professional DJ use.

The PRO5x headphones are equipped with newly developed 40 mm drivers capable of handling 1,500 mW of input power, giving you extremely accurate sound reproduction that remains distortion-free even at high volume. And the soft, durable earpads fit comfortably over the ears to provide excellent sound isolation.

As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50x professional monitor headphones feature the same coveted sonic signature, with the added feature of detachable cables. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals.

The ATH-ANC900BT QuietPoint® wireless over-ear headphones feature digital hybrid noise-cancelling technology for the highest degree of ambient noise reduction of any QuietPoint® model.

A deeper quiet, for deeper listening. Our QuietPoint® digital hybrid noise-cancelling technology reduces ambient noise like no other.

With both feedback and feedforward microphones in each earcup, the ATH-ANC900BT captures and cancels the full scope of environmental noise.

Сompatible with the high-quality Qualcomm® aptX™ audio and AAC codes, these headphones give you exceptionally pure sound from your favorite wireless device with Bluetooth® technology. Or use them with the included audio cable for even greater sound quality, including Hi-Res Audio playback.

The AT-LP60X is a fully automatic belt motor vinyl player, plays both 33-1 / 3 and 45 rpm recordings, and thanks to the built-in switchable background preamp, it can be connected directly to home stereos, speakers, computer and other components independently whether they have a phono input or not.

AT-LP60XBT fully automatic, belt motor vinyl player. To be able to connect to a headset or other wireless devices via Bluetooth and it is required.

The AT-LP60XBT can also operate like a regular vinyl player with a traditional wired connection. Either way - wired or wireless - you'll get great audio with automatic ease of control controlled by the front panel's start, stop and sign-up buttons.

The AT-LPW40WN is a fully manual, belt motor vinyl player designed to provide optimal high-precision audio reproduction.

The AT-LPW40WN is equipped with a built-in phono preamp and a detachable dual RCA output cable that provides direct connection to components with or without a dedicated phono input.

AT-LP3 fully automatic, belt motor vinyl player. The built-in AT91R Dual Moving Magnet phono cartridge has a built-in aluminum console for enhanced reception of fine audio details.

The AT-LP3 includes a 4.5 mm thick rubber plate mat to reduce unwanted vibration and ensure stable playback.

The AT-LPW50PB is a fully manual, belt motor vinyl player designed to provide optimal high-precision audio reproduction. The motor has a speed sensor system that ensures accurate plate rotation speed

The AT-VM95E cartridge is compatible with any spare needle in the VM95 series, offering a wide range of options for every budget and application.

The AT-LP60XUSBGM is fully automatic, belt motor vinyl player that lets you experience high-precision audio. The vinyl player is equipped with a USB output, which allows direct connection to a computer.

Download free Mac and PC compatible Audacity recording software (or software of your choice) and start converting recordings to digital audio formats. In addition to the USB output, the vinyl player also comes with a detachable RCA output cable and a built-in plug-in phono preamp so you can connect directly to your home stereo, speakers, computer and other components, whether or not they have a phono input.

The AT-LP120XUSB direct-drive, fully manual vinyl player features adjustable dynamic anti-slip controls and an optional phono preamp. The vinyl player is equipped with a USB output, which allows you to connect directly to a computer.

Download free Mac and PC compatible Audacity recording software (or software of your choice) and start converting your recordings to digital audio files.

The AT-LP5X direct-drive, a fully manual vinyl player features advanced technology while retaining the modern style of its predecessor. The AT-LP5x retains a J-shaped tonearm design inspired by the classic Audio-Technica models of the 1960s and 70s, and features a metal mounting suspension system and precise bearings to reduce vinyl read errors.

Made from anti-vibration materials with heavy metal inserts, the AT-LP5x vinyl player is designed to limit low frequency acoustic feedback.

The APART CM1008 dual-band wall-mounted speaker can be used with a standard hi-fi or professional amplifier.

The CM1008 has a 1-inch beep and an 8-inch polypropylene bass driver that makes the speaker moisture-resistant.

The APART CM20T dual-band wall-mounted speaker can be used in a 16-ohm or 100-volt system. With 16 ohms, up to 4 speakers can be connected in parallel in each standard 4-ohm amplifier channel. For 100 volt use, the CM20T is equipped with a high quality 20 watt 100 volt transformer with multiple power pressures. Therefore, it can be used in projects with high ceilings or in places with background noise where slightly more power is required.

APART CM3T is a small, wall-mounted 70/100 volt speaker. CM3T speaker is ideal for background music in quiet places, toilets, wardrobes, etc.

The speaker has a metal frame and a coated double paper cone, which provides less deformation and greater resistance to moisture.

The APART CM4 is a small, ceiling-mounted speaker with 4-inch bass drivers. The CM4 speaker is compact in size, but provides good music quality.

The compact size of the APART CM4T ceiling speaker provides excellent and powerful sound quality.

The CM4T speaker can be used both in situations where low power is more suitable (to perform the background music function) and in situations where higher power is required (listening to music, watching movies).

The APART CM608 wall / ceiling built-in speaker can be used with a standard hi-fi amplifier and provides Pro HiFi sound.

The speaker has a 6 1/2 inch bass driver and a 1 inch beep. This makes the CM608 very suitable for playing background music. The bass driver is made of polypropylene, which makes the speaker moisture-resistant.

The APART CM6T is a dual-band 100-volt wall-mounted speaker for announcement or background music. Up to 4 other speakers can be connected in parallel to the speaker.

The APART CMX20T is a wall-mounted speaker with an 8-inch polypropylene bass driver and a 1-inch beep. The speaker is suitable for notification and background music at the highest volume.

The APART CM1008D is a ceiling-mounted speaker with an 8-inch bass driver that delivers music at the highest volume. The speaker can be used with a professional or standard HI-FI amplifier. This is a design version - the speaker has a minimal outer frame, frame.

The APART CM20DT is a wall-mounted dual-band speaker that can be used in 16 ohm or 70/100 volt modes. The speakers are a 6 1/2 inch bass driver.

Using 16 ohms, up to 4 speakers can be connected in parallel in each standard 4 ohm amplifier channel.

The APART CM20DTS is a ceiling-mounted dual-band speaker with a 4 1/4-inch bass driver. Skanda is perfect for high quality background music and voice playback. Sound quality and controlled sound performance make the speaker suitable for any type of ceiling construction.

The front of the CM20DTS speaker has a rotatable 70/100 volt power touch selector and offers 16 ohm connectivity.

The APART CM30DTD is a dual-band ceiling speaker with a bass reflex port that offers controlled voice and sound performance for any type of ceiling construction.

Speaker is ideal for playing dynamic background music and can be combined with other models in the range. Different power modes can be selected with a convenient 70/100 volt selector on the front of the speaker.

The APART CM608D is a ceiling-mounted dual-band speaker with a 6 1/2-inch bass driver. The speaker provides low resistance and is very suitable for playing background music. The CM608D can be used with a standard H-FI amplifier.

The APART CM60DTD is a ceiling-mounted dual-band speaker with a 6 1/2-inch bass driver. The speaker is suitable for playing voice and music at the highest volume. The CM60DTD speaker delivers dynamic and powerful sound thanks to an adjusted bass reflex port and controlled performance.

The 70/100 volt system offers 16 ohm connectivity.

The APART CMX20DT ceiling-mounted speaker has an 8-inch bass driver. When using a speaker in 16 ohm mode, 4 speakers can be connected in parallel.

When using a 100-volt system, the CMX20DT is equipped with a Quick Fit connector, a convenient input and output connector for push-button connection of speaker cables up to 2.5 mm.

APART SQGR is an optional square speaker grille with included safety cable, suitable for all CM Design series speakers. This option is suitable for CM60DTD, CM30DTD, CM20DTS, CM1008D, CM608D, CM20DT, CMX20DT speakers.

The thin edges of the SQGR grille can be repainted.

The APART CM6E is a ceiling-mounted speaker with a two-cone 6 1/2-inch bass driver suitable for almost any installation. The CM6E speaker provides loud and clear sound reproduction.

The CM6E has multiple power modes (6 - 3 - 1.5 watts), and the speaker is ideal for playing an announcement system and background music.

The APART CMSUB8 is a ceiling / wall-mounted subwoofer with an 8-inch dual-coil bass driver. The subwoofer provides strong and powerful bass. This subwoofer is the perfect partner for all types of satellite speakers: small and medium CM speakers (CM3T, CM4, CM4T and many others), as well as small body speakers such as MASK4 (T).

Thanks to the speaker design, high-quality background music is played with great bass. Due to the aluminum grille, this speaker is also suitable for use in wet conditions.

APART CMAR5-W is a wall / ceiling built-in speaker that is resistant to chlorine and salt water. The speakers are a dual-band 5 1/4 inch bass driver. This speaker is specially designed to offer excellent sound and its efficiency even in wet and hot conditions.

APART CMAR5T is a wall / ceiling built-in speaker, which is perfect for swimming pools, saunas and bathrooms. This speaker delivers high quality sound.

CMAR5T speaker is also suitable for 100V systems.

APART CMAR6T is a wall / ceiling built-in speaker that provides high quality sound in wet areas.

CMAR6T speaker is also suitable for 100V systems.

The APART CMAR8 is a chlorine and saltwater resistant speaker with a dual-band 8-inch bass driver. This speaker is specially designed to offer excellent sound and its efficiency in wet and hot conditions.

CMAR8 speaker is perfect for saunas.

APART CMAR8T is a wall / ceiling built-in speaker that provides high quality sound in wet areas.

CMAR8T speaker is also suitable for 100V systems.

The APART MASK2 installation speaker combines both compact size and excellent sound quality at the same time. The MASK2 has a 2 1/2 inch bass driver. This speaker is suitable for installation in shops and bars.

APART MASK4C is an installation speaker that can be used for both indoor and outdoor use. The MASK4C speaker has a 4 1/4 inch bass driver and a 1 inch silk dome beep for high sound quality.

APART MASK4CT is an installation speaker that can be used both indoors and outdoors. MASK4CT can be used as a 100V system speaker with several power modes (20 - 10 - 5 - 2.5 watts). This speaker provides excellent sound quality.

The MASK4CT speaker has a dual-band 4 1/4 inch bass driver and a 1-inch silk dome beep.

APART MASK6C is an installation speaker that can be used both indoors and outdoors. The MASK6C speaker design provides high sound quality. The speaker has a dual-band 6 1/2 inch bass driver and a 1-inch silk dome beep.

APART MASK6CT is an installation speaker that can be used both indoors and outdoors. The speaker design provides excellent sound quality. MASK6CT can be used as a 100V system with several power modes (60 - 30 - 15 - 6 watts).

The MASK6CT speaker has a dual-band 6 1/2 inch bass driver and a 1-inch silk dome beep.

APART MASK8F is an installation speaker that provides HI-FI sound quality. The MASK8F speaker has a dual-band 8-inch bass driver and a 1-inch silk dome beep.

The APART KUBO3 installation speaker features a 3-inch full-range bass driver with bass reflex for fast and dynamic bass response. The symmetrical cube-shaped design of the KUBO3 speaker creates 40 watts of dynamic power at 8 ohms.

The APART KUBO3T installation speaker has a 3-inch full-range bass driver with bass reflex. The KUBO3T can also be used as a 100V system or a 16-ohm speaker that provides up to 40 watts of dynamic power.

The APART KUBO5 installation speaker features a dual-band 5 1/4-inch bass driver with integrated bass reflex for dynamic and fast bass response. The KUBO5 speaker at 8 ohms generates 80 watts of dynamic power.

The APART KUBO5T installation speaker has a dual band 5 1/4 inch bass driver with bass reflex. The KUBO5T can be used both as a 100 volt system and as a 16 ohm speaker that provides 80 watts of dynamic power.

The APART OVO3 installation speaker has a dual-band, low-resistance 3-inch bass driver. This speaker provides excellent sound quality despite its compact size.

The OVO3 speaker is perfect for installation in living spaces and retail stores to perform background music function.

The APART OVO3T installation speaker has a dual-band 3-inch bass driver. This speaker provides excellent sound quality despite its compact size.

OVO3T can be used both as a 100V system and as a 16 ohm speaker.

The APART OVO5 installation speaker has a dual band 5 1/4 inch bass driver. This speaker provides excellent sound quality despite its compact size. The OVO5 speaker performs the function of distributing background music.

The speaker can be mounted on the wall or placed on a shelf.

The APART OVO5T installation speaker can be used both indoors and outdoors (coated only). The OVO5T speaker can be used as a 100V system with multiple power modes (30 - 15 - 6 - 3 watts). This speaker generates 80 watts of dynamic power at 16 ohms.

The APART OVO5P installation speaker has a 5 1/4 inch bass driver and a 1 inch soft dome beep. The OVO5P speaker provides excellent sound quality and high sound level with 2 x 20 W output power.

The speaker can be mounted on the wall or on a shelf.

The APART OVO8 installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. The speaker provides pronounced bass and excellent sound quality.

The OVO8 speaker can be mounted on the wall with the help of the included wall bracket or on a shelf without it.

The APART OVO8P installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. This speaker provides pronounced bass and excellent sound quality.

The OVO8P speaker can be mounted on the wall with the included wall bracket or on a shelf without it.

The APART OVO8T installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. The OVO8T speaker can also be used as a 100V system.

The speaker can be mounted on the wall with the help of the included wall bracket or on a shelf without it.

The APART SDQ5P speaker has a 5 1/4 inch bass driver and a 1 inch beep. The SDQ5P speaker provides detailed audio playback.

The APART SDQ5PIR has a 5 1/4 inch bass driver and a 1 inch beep. The SDQ5PIR speaker provides detailed audio playback.

This sound can be controlled with the remote control.

The APART SUB2201 subwoofer has a 10-inch passive subwoofer that provides excellent bass performance. The subwoofer provides 250 watts of music power at 4 ohms.

The APART SUB2400 subwoofer has two passive 10-inch subwoofers for excellent bass performance.

The SUB2400 can operate in 4 ohm or 16 ohm mode. The mode is selected by the large switch on the back of the subwoofer.

The APART SUBLIME subwoofer has a 6 1/2 inch bass driver for excellent bass performance.

The SUBLIME subwoofer is a great partner for MASK series top speakers.

The APART VINCI8S subwoofer has an 8-inch bass driver for great bass playback.

VINCI8S is a great partner for shelf speakers such as VINIC4, VINCI5 or even the most prestigious VINCI7 series in the VINCI series.

APART SM6 is a wall-mounted speaker that also has a 100V system mode. The SM6 speaker delivers great sound quality and a simple design.

The SM6 speaker is great for playing background music.

APART SM6V is a wall-mounted speaker. The SM6 speaker has a 5-inch bass driver and is equipped with a 100V system that operates in several modes (1.5 - 3 - 6 watts).

The SM6 speaker is great for playing background music.

APART SMB6 is a wall / ceiling speaker. The speaker has a 5-inch bass driver and is equipped with a 100V power transformer (1.5 - 3 - 6 watts).

The SMB6 speaker is great for playing background music.

APART SMB6V is a wall / ceiling built-in speaker. The speaker has a 5-inch bass driver and is equipped with a 100V power transformer (1.5 - 3 - 6 watts).

The SMB6V speaker is great for playing background music.

The APART P30DT ceiling-mounted speaker features a dual-band 4 1/4-inch subwoofer for clean, clear sound. The P30DT speaker is also a 100V system with multiple power modes (30 - 15 - 7.5 - 3.75 watts).

The APART P60DT ceiling-mounted speaker features a dual-band 6 1/2-inch subwoofer for excellent sound quality. The P60DT speaker is also a 100V system at 16 ohms and has several power modes (60 - 30 - 15 - 7.5 watts).

The APART SPH16 has a dual-band 5 1/4 inch bass driver and a 1-inch beep. Skanda is also a 100V system with several power modes (16 - 8 - 4 watts). The SPH16 speaker delivers clear sound quality.

The SPH16 speaker is great for playing background music and a notification system.

The APART SPH20 features an 8-inch bass driver. This speaker is also a 100V system with several power modes (20 - 10 -5 watts). The SPH20 speaker provides a wide dispersion of sound and excellent sound quality.

The SPH20 speaker is perfect for playing background music and a notification system.

The APART ROCK20 features a dual-band 6 1/2-inch bass driver and a 1-inch beep. The ROCK20 speaker is also a 100V system with several power modes (20 - 10 - 5 - 2.5 watts).

The speaker is suitable for use in your garden or terrace and its design makes the speaker inconspicuous.

The APART ROCK608 garden / patio has a dual 1 6/2-inch subwoofer and a 1-inch beep. The ROCK608 speaker provides HI-FI sound quality and wide sound dispersion.

The ROCK608 speaker can be used with any amplifier.

The APART COLS101 speaker has a 10 x 2-inch bass driver and a 1-inch beep. The COLS101 is an ultra-thin speaker that is perfect for playing sound in difficult places.

The COLS101 speaker is also a 100V system with several power modes (40 - 20 - 10 - 5 watts).

The APART COLS41 has 4 x 2-inch bass drivers and a 1-inch beep. COLS41 is an ultra-thin speaker that is perfect for playing sound in difficult places.

The COLS41 speaker is also a 100V system with several power modes (20 - 10 - 5 - 2.5 watts).

The APART COLS81 has 8 x 2-inch bass drivers and a 1-inch beep. COLS81 is an ultra-thin speaker that is perfect for playing sound in difficult places.

The COLS81 speaker is also a 100V system with multiple power modes (30 - 15 - 6 - 3 watts).

The APART COLW101 speaker has a 10 x 3.3-inch bass driver and a 1-inch beep. The COLW101 speaker provides excellent sound quality and is ideal for playing background music and notification systems.

The COLW101 speaker is also a 100V system with several power modes (100 - 60 - 40 - 20 watts).

The APART COLW41 has 4 x 3.3-inch bass drivers and a 1-inch beep. This speaker provides excellent sound quality and is perfect for playing background music and notification systems.

The COLW41 speaker is also a 100V system with several power modes (40 - 30 - 15 - 7 watts).

The APART COLW81 has 8 x 3.3-inch bass drivers and a 1-inch beep. This speaker provides excellent sound quality and is perfect for playing background music and notification systems.

The COLW81 speaker is also a 100V system with several power modes (80 - 40 - 30 - 15 watts).

The APART MP16 sound projector has a 5 1/4 inch bass driver. The MP16 delivers clear sound quality and is great for playing background music and notification systems.

The MP16 sound projector is also a 100V system with multiple power modes (16 - 10 - 5 watts).

The APART MP26 sound projector has a 6 1/2 inch bass driver. The MP26 sound projector delivers high sound quality and is perfect for playing background music and notification systems.

The MP26 sound projector is also a 100V system with multiple power modes (26 - 20 - 10 watts).

The APART MPBD20 sound projector has 2 x 5 1/4 inch bass drivers. This sound projector is moisture resistant, so it is perfect for placing in your garden or terrace.

The MPBD20 sound projector is also a 100V system with multiple power modes (20 - 10 - 5 watts).