The APART REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 100 watts output power.

Another smart feature of the REVAMP1680 is the standby power supply with multiple auto on / off options. You can switch the device on or off using the audio sensor.

The APART REVAMP4240T is a professional 4-channel digital power amplifier. This amplifier has a variable speed cooling fan that is activated only in emergencies.

The APART REVAMP8250 is a professional 8-channel power amplifier. The amplifier has a built-in variable speed cooling fan that keeps the unit cool at all times. The REVAMP8250 amplifier is easy to install.

The APART REVAMP4120T is a professional 4-channel digital power amplifier. This amplifier has a variable speed cooling fan that is activated only in emergencies.

The APART PA2240BP is a 2-channel 100 volt power amplifier. It can be configured as a 2-channel amplifier (2 x 240 watts) or it can be connected to a 1 x 480 watt power amplifier if you need to run a large band up to 480 watts.

APART ZONE4 is a preamplifier that allows you to control 4 stereo zones. The ZONE4 can be controlled from the front panel (with digital display) via the RS232 connector.

APART PREZONE2 is a multifunctional stereo preamplifier that allows you to independently control the selection and volume of music sources in 2 stereo zones. This allows you to easily mix 2 microphone levels with any of the 4 music sources. PREZONE2 features make it suitable for almost all professional audio installations.

The PREZONE2 preamplifier is easy to install.

APART MA240 is a mixing amplifier, which is also a 100V system. This amplifier is both easy to install and easy to use.

The APART SUB2400 subwoofer has two passive 10-inch subwoofers for excellent bass performance.

The SUB2400 can operate in 4 ohm or 16 ohm mode. The mode is selected by the large switch on the back of the subwoofer.

APART REVAMP2600 is a professional two-channel power amplifier. The internal signal processor operates with a single button on the back of the device to select the operating mode. This amplifier is a multifunctional tool that is perfect for places that require a lot of energy in two different areas, such as fitness centers.

The APART PA240P is a fully equipped 240 watt DC power amplifier. It is a device designed for larger professional audio installations.

APART CHAMP-4 is a universal power amplifier. There is no fan inside the CHAMP-4, which means that the amplifier runs very quietly and is always dust-free.

The APART REVAMP4100 is a professional digital four-channel amplifier with high-performance Class D amplifier modules inside.

The APART REVAMP2120T is a dual-channel digital power amplifier. This amplifier is without built-in fans, so the amplifier is always completely free of noise and dust.

The APART SUB2201 subwoofer has a 10-inch passive subwoofer that provides excellent bass performance. The subwoofer provides 250 watts of music power at 4 ohms.

APART PCR3000RMKIII is a professional multi-source CD / USB / SD card media player with integrated FM RDS and DAB + receiver. In addition, the player now has an internal Bluetooth receiver that can be connected to any music source, smartphone or computer equipped with a Bluetooth connection.

The APART REVAMP2250 is a professional two-channel digital power amplifier.

The APART REVAMP2060T is a professional two-channel digital power amplifier. This amplifier is easy to install. The REVAMP2060T amplifier does not have a fan, so it operates quietly and does not accumulate dust.

The APART REVAMP1120T is a single channel professional power amplifier. This amplifier does not have a fan, so it is quiet. The REVAMP1120T amplifier is easy to install.

The APART REVAMP2150 is a professional two-channel digital power amplifier. This amplifier is cooled by convection without built-in fans, which means that the amplifier is completely noise-free and dust-free at all times.

APART MA120 is a mixing amplifier, which is also a 100V system. The amplifier has a modern design and is easy to use. The MA120 amplifier is also easy to install.

The APART COLW101 speaker has a 10 x 3.3-inch bass driver and a 1-inch beep. The COLW101 speaker provides excellent sound quality and is ideal for playing background music and notification systems.

The COLW101 speaker is also a 100V system with several power modes (100 - 60 - 40 - 20 watts).

APART PREZONE1 is a multifunctional stereo preamplifier that allows you to independently control the volume in 2 stereo zones. This allows you to easily mix 2 microphone levels with any of the 4 music sources. The PREZONE1's preamp features make it suitable for almost any professional audio installation.

The PREZONE1 preamplifier is easy to install.

The APART MA65 is a compact 100 volt mixing amplifier. This amplifier can be the basis for many small installations where you need to perform the functions of a background music and notification system.

The APART COLW81 has 8 x 3.3-inch bass drivers and a 1-inch beep. This speaker provides excellent sound quality and is perfect for playing background music and notification systems.

The COLW81 speaker is also a 100V system with several power modes (80 - 40 - 30 - 15 watts).

The APART SUBLIME subwoofer has a 6 1/2 inch bass driver for excellent bass performance.

The SUBLIME subwoofer is a great partner for MASK series top speakers.

The APART MA60 is a compact 9 1/2 inch mixing amplifier. This amplifier is both easy to install and easy to use.

The APART MPLT62 trumpet features a dual-band 6 1/2-inch bass driver and a 1-inch beep. The speaker provides high-quality sound performance. The MPLT62 speaker performs the function of an alarm system and background music playback.

The MPLT62 speaker is also a 100V system with multiple power modes (62 - 32 - 16 - 8 watts).

APART MASK8F is an installation speaker that provides HI-FI sound quality. The MASK8F speaker has a dual-band 8-inch bass driver and a 1-inch silk dome beep.

The APART P60DT ceiling-mounted speaker features a dual-band 6 1/2-inch subwoofer for excellent sound quality. The P60DT speaker is also a 100V system at 16 ohms and has several power modes (60 - 30 - 15 - 7.5 watts).

The APART MPLT32 trumpet features a dual-band 6 1/2-inch bass driver and a 1-inch beep. Skanda provides high-quality sound performance over long distances. The MPLT32 speaker plays the background music and notification system.

The MPLT32 speaker is also a 100V system with multiple power modes (32 - 16 - 8 - 4 watts).

APART PC1000RMKII is a professional multi-source CD / USB / SD card media player.

There is an operation switch on the back of the player to choose between Auto Play and Cue. When the PC1000RMKII is in auto play mode, the player always starts playing automatically when it is turned on. Cue mode will wait for the play command after turning on. This feature allows you to select a song without playing it automatically.

The APART MA30 is a compact 9 1/2 inch mixing amplifier. This amplifier is both easy to install and easy to use.

The APART COLS101 speaker has a 10 x 2-inch bass driver and a 1-inch beep. The COLS101 is an ultra-thin speaker that is perfect for playing sound in difficult places.

The COLS101 speaker is also a 100V system with several power modes (40 - 20 - 10 - 5 watts).

The APART EN-SPH6T20 has a 6 1/2 inch bass driver. This speaker is also a 100V system with several power modes (20 - 15 - 10 - 5 - 2.5 watts).

The APART COLW41 has 4 x 3.3-inch bass drivers and a 1-inch beep. This speaker provides excellent sound quality and is perfect for playing background music and notification systems.

The COLW41 speaker is also a 100V system with several power modes (40 - 30 - 15 - 7 watts).

The APART OVO8P installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. This speaker provides pronounced bass and excellent sound quality.

The OVO8P speaker can be mounted on the wall with the included wall bracket or on a shelf without it.

The APART P30DT ceiling-mounted speaker features a dual-band 4 1/4-inch subwoofer for clean, clear sound. The P30DT speaker is also a 100V system with multiple power modes (30 - 15 - 7.5 - 3.75 watts).

The APART COLS81 has 8 x 2-inch bass drivers and a 1-inch beep. COLS81 is an ultra-thin speaker that is perfect for playing sound in difficult places.

The COLS81 speaker is also a 100V system with multiple power modes (30 - 15 - 6 - 3 watts).

The APART SDQ5PIR has a 5 1/4 inch bass driver and a 1 inch beep. The SDQ5PIR speaker provides detailed audio playback.

This sound can be controlled with the remote control.

The APART OVO5P installation speaker has a 5 1/4 inch bass driver and a 1 inch soft dome beep. The OVO5P speaker provides excellent sound quality and high sound level with 2 x 20 W output power.

The speaker can be mounted on the wall or on a shelf.

The APART OVO8T installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. The OVO8T speaker can also be used as a 100V system.

The speaker can be mounted on the wall with the help of the included wall bracket or on a shelf without it.

The APART EN-MPBD5T10 has 2 x high performance full range 5 1/4 inch bass drivers. This speaker provides background music and alarm playback features.

The EN-MPBD5T10 is also a 100V system with multiple power modes (10 - 6 - 3 - 1.5 watts).

The APART EN-MP5T20 has 2 x high-performance full-range bass drivers. This speaker provides background music and alarm playback.

The EN-MP5T20 is also a 100V system with multiple power modes (20 - 15 - 10 - 5 watts).

The APART CM60DTD is a ceiling-mounted dual-band speaker with a 6 1/2-inch bass driver. The speaker is suitable for playing voice and music at the highest volume. The CM60DTD speaker delivers dynamic and powerful sound thanks to an adjusted bass reflex port and controlled performance.

The 70/100 volt system offers 16 ohm connectivity.

The APART SDQ5P speaker has a 5 1/4 inch bass driver and a 1 inch beep. The SDQ5P speaker provides detailed audio playback.

The APART ROCK20 features a dual-band 6 1/2-inch bass driver and a 1-inch beep. The ROCK20 speaker is also a 100V system with several power modes (20 - 10 - 5 - 2.5 watts).

The speaker is suitable for use in your garden or terrace and its design makes the speaker inconspicuous.

The APART D-ALINP is a wall-mounted audio control panel that allows you to connect a music source and / or a dynamic microphone. The connected music source and microphone have individual volume control.

The built-in microphone amplifier and high-quality input transformer guarantee excellent audio quality.

The APART OVO8 installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. The speaker provides pronounced bass and excellent sound quality.

The OVO8 speaker can be mounted on the wall with the help of the included wall bracket or on a shelf without it.

APART CMAR8T is a wall / ceiling built-in speaker that provides high quality sound in wet areas.

CMAR8T speaker is also suitable for 100V systems.

APART ALINP is a wall-mounted audio control panel. ALINP allows you to connect a music source and / or a dynamic microphone. The connected music source and microphone have individual volume control.

The built-in microphone amplifier and high-quality input transformer guarantee excellent audio quality.

The APART DIWAC wall-mounted audio control unit is ideal for controlling AUDIOCONTROL12.8 in any room. The wall mount audio control unit is programmable via the host unit's graphical installer interface to provide the required functionality.

The APART D-DIWAC wall-mounted audio control unit is ideal for controlling AUDIOCONTROL12.8 and AUDIOSYSTEM8.8 in any room. D-DIWAC is configured as an audio control unit with “Source Select” and “Volume Control” buttons.

APART MASK6CT is an installation speaker that can be used both indoors and outdoors. The speaker design provides excellent sound quality. MASK6CT can be used as a 100V system with several power modes (60 - 30 - 15 - 6 watts).

The MASK6CT speaker has a dual-band 6 1/2 inch bass driver and a 1-inch silk dome beep.

The APART EN-SPH5T16 has a 5 1/4 inch bass driver. The EN-SPH5T16 speaker provides high sound pressure levels and a balanced frequency response.

The EN-SPH5T16 is also a 100V system with multiple power modes (16 - 8 - 4 watts).

APART MASK6C is an installation speaker that can be used both indoors and outdoors. The MASK6C speaker design provides high sound quality. The speaker has a dual-band 6 1/2 inch bass driver and a 1-inch silk dome beep.

The APART ROCK608 garden / patio has a dual 1 6/2-inch subwoofer and a 1-inch beep. The ROCK608 speaker provides HI-FI sound quality and wide sound dispersion.

The ROCK608 speaker can be used with any amplifier.

The APART ZONE4R is a multifunctional 4-zone preamplifier with a remote control. The control panel offers music level control, source selection and microphone mixing level control. The clear digital display makes it easy to monitor the operation of the device.

The APART CM30DTD is a dual-band ceiling speaker with a bass reflex port that offers controlled voice and sound performance for any type of ceiling construction.

Speaker is ideal for playing dynamic background music and can be combined with other models in the range. Different power modes can be selected with a convenient 70/100 volt selector on the front of the speaker.

The APART KUBO5T installation speaker has a dual band 5 1/4 inch bass driver with bass reflex. The KUBO5T can be used both as a 100 volt system and as a 16 ohm speaker that provides 80 watts of dynamic power.

APART EN-H15 is a trumpet made of UV-resistant material. The EN-H15 speaker is also a 100V system with several power modes (15 - 7.5 - 3.75 - 1.87 watts).

APART CMAR6T is a wall / ceiling built-in speaker that provides high quality sound in wet areas.

CMAR6T speaker is also suitable for 100V systems.

The APART CMSUB8 is a ceiling / wall-mounted subwoofer with an 8-inch dual-coil bass driver. The subwoofer provides strong and powerful bass. This subwoofer is the perfect partner for all types of satellite speakers: small and medium CM speakers (CM3T, CM4, CM4T and many others), as well as small body speakers such as MASK4 (T).

Thanks to the speaker design, high-quality background music is played with great bass. Due to the aluminum grille, this speaker is also suitable for use in wet conditions.

The APART CM20DTS is a ceiling-mounted dual-band speaker with a 4 1/4-inch bass driver. Skanda is perfect for high quality background music and voice playback. Sound quality and controlled sound performance make the speaker suitable for any type of ceiling construction.

The front of the CM20DTS speaker has a rotatable 70/100 volt power touch selector and offers 16 ohm connectivity.

The APART MPBD20 sound projector has 2 x 5 1/4 inch bass drivers. This sound projector is moisture resistant, so it is perfect for placing in your garden or terrace.

The MPBD20 sound projector is also a 100V system with multiple power modes (20 - 10 - 5 watts).

The APART HM25 is a horn that provides an alarm system and alarm playback. Skanda is intended for both indoor and outdoor use. The HM25 has a distinctive and powerful sound quality.

The HM25 speaker is also a 100V system with multiple power modes (25 - 20 - 10 watts).

The APART COLS41 has 4 x 2-inch bass drivers and a 1-inch beep. COLS41 is an ultra-thin speaker that is perfect for playing sound in difficult places.

The COLS41 speaker is also a 100V system with several power modes (20 - 10 - 5 - 2.5 watts).

The APART CMAR8 is a chlorine and saltwater resistant speaker with a dual-band 8-inch bass driver. This speaker is specially designed to offer excellent sound and its efficiency in wet and hot conditions.

CMAR8 speaker is perfect for saunas.

APART EN-H10 is a trumpet made of UV-resistant material. This speaker is intended for both indoor and outdoor use.

The EN-H10 also has a 100V system with multiple power modes (0 - 5 - 2.5 - 1.25 watts).

The APART KUBO5 installation speaker features a dual-band 5 1/4-inch bass driver with integrated bass reflex for dynamic and fast bass response. The KUBO5 speaker at 8 ohms generates 80 watts of dynamic power.

APART MASK4CT is an installation speaker that can be used both indoors and outdoors. MASK4CT can be used as a 100V system speaker with several power modes (20 - 10 - 5 - 2.5 watts). This speaker provides excellent sound quality.

The MASK4CT speaker has a dual-band 4 1/4 inch bass driver and a 1-inch silk dome beep.

APART CMAR5T is a wall / ceiling built-in speaker, which is perfect for swimming pools, saunas and bathrooms. This speaker delivers high quality sound.

CMAR5T speaker is also suitable for 100V systems.

The APART EN-SMS6MT6 is a surface-mounted speaker with a 6 1/2 inch bass driver. This speaker provides excellent sound quality.

The EN-SMS6MT6 also has a 100V system with multiple power modes (6 - 3 - 1.5 watts).

The APART EN-CMX6T10 ceiling-mounted speaker has a dual-band 6 1/2-inch bass driver. Skanda provides background music and alarm playback features.

The EN-CMX6T10 is also a 100V system with multiple power modes (10 - 6 - 3 - 1.5 watts).

APART MASK4C is an installation speaker that can be used for both indoor and outdoor use. The MASK4C speaker has a 4 1/4 inch bass driver and a 1 inch silk dome beep for high sound quality.

The APART MPH31 sound projector has a 5 1/4 inch bass driver. The MPH31 is great for playing background music and notification systems.

The MPH31 sound projector is also a 100V system with multiple power modes (30 - 15 - 7.5 - 4 watts).

The APART SPH20 features an 8-inch bass driver. This speaker is also a 100V system with several power modes (20 - 10 -5 watts). The SPH20 speaker provides a wide dispersion of sound and excellent sound quality.

The SPH20 speaker is perfect for playing background music and a notification system.

The APART H30LT is a horn-type speaker that provides an alarm system and alarm playback function. The H30LT can be used for both indoor and outdoor playback.

The H30LT speaker is also a 100V system with multiple power modes (30 - 15 - 7.5 - 3.75 watts).

The APART OVO5T installation speaker can be used both indoors and outdoors (coated only). The OVO5T speaker can be used as a 100V system with multiple power modes (30 - 15 - 6 - 3 watts). This speaker generates 80 watts of dynamic power at 16 ohms.

The APART KUBO3T installation speaker has a 3-inch full-range bass driver with bass reflex. The KUBO3T can also be used as a 100V system or a 16-ohm speaker that provides up to 40 watts of dynamic power.

The APART MP26 sound projector has a 6 1/2 inch bass driver. The MP26 sound projector delivers high sound quality and is perfect for playing background music and notification systems.

The MP26 sound projector is also a 100V system with multiple power modes (26 - 20 - 10 watts).

The APART CMX20DT ceiling-mounted speaker has an 8-inch bass driver. When using a speaker in 16 ohm mode, 4 speakers can be connected in parallel.

When using a 100-volt system, the CMX20DT is equipped with a Quick Fit connector, a convenient input and output connector for push-button connection of speaker cables up to 2.5 mm.

The APART EN-SM6T10 is a surface-mounted speaker with a 6 1/2 inch bass driver. This speaker provides excellent sound quality.

The EN-SM6T10 also has a 100V system with multiple power modes (10 - 6 - 3 - 1.5 watts).

The APART SPH16 has a dual-band 5 1/4 inch bass driver and a 1-inch beep. Skanda is also a 100V system with several power modes (16 - 8 - 4 watts). The SPH16 speaker delivers clear sound quality.

The SPH16 speaker is great for playing background music and a notification system.

The APART EN-SMS6T6 is a surface-mounted speaker with a 6 1/2 inch bass driver. This speaker provides excellent sound quality.

The EN-SMS6T6 also has a 100V system with multiple power modes (6 - 3 - 1.5 watts).

APART H20 is a moisture-resistant trumpet. The speaker offers high sound pressure, which makes this speaker ideal for playing an alarm system in a noisy environment. H20 is intended for both indoor and outdoor use.

The H20 speaker is also a 100V system with multiple power modes (20 - 10 - 5 - 2.5 watts).

The APART KUBO3 installation speaker features a 3-inch full-range bass driver with bass reflex for fast and dynamic bass response. The symmetrical cube-shaped design of the KUBO3 speaker creates 40 watts of dynamic power at 8 ohms.

The APART OVO5 installation speaker has a dual band 5 1/4 inch bass driver. This speaker provides excellent sound quality despite its compact size. The OVO5 speaker performs the function of distributing background music.

The speaker can be mounted on the wall or placed on a shelf.

The APART CMX20T is a wall-mounted speaker with an 8-inch polypropylene bass driver and a 1-inch beep. The speaker is suitable for notification and background music at the highest volume.

The APART E-VOLST is a 4-ohm low-resistance stereo volume control capable of delivering up to 2 x 40 watts of power.

The APART CM20DT is a wall-mounted dual-band speaker that can be used in 16 ohm or 70/100 volt modes. The speakers are a 6 1/2 inch bass driver.

Using 16 ohms, up to 4 speakers can be connected in parallel in each standard 4 ohm amplifier channel.

The APART MP16 sound projector has a 5 1/4 inch bass driver. The MP16 delivers clear sound quality and is great for playing background music and notification systems.

The MP16 sound projector is also a 100V system with multiple power modes (16 - 10 - 5 watts).

APART SMB6V is a wall / ceiling built-in speaker. The speaker has a 5-inch bass driver and is equipped with a 100V power transformer (1.5 - 3 - 6 watts).

The SMB6V speaker is great for playing background music.

The APART CM1008D is a ceiling-mounted speaker with an 8-inch bass driver that delivers music at the highest volume. The speaker can be used with a professional or standard HI-FI amplifier. This is a design version - the speaker has a minimal outer frame, frame.

APART CMAR5-W is a wall / ceiling built-in speaker that is resistant to chlorine and salt water. The speakers are a dual-band 5 1/4 inch bass driver. This speaker is specially designed to offer excellent sound and its efficiency even in wet and hot conditions.

The APART D-VOL120 is a 70 volt volume control device. It can handle up to 120 watts of power and is very durable. The D-VOL120 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.