The APART OVO8T installation speaker has an 8-inch bass driver and a 1-inch silk dome beep. The OVO8T speaker can also be used as a 100V system.

The speaker can be mounted on the wall with the help of the included wall bracket or on a shelf without it.

APART MASK8F is an installation speaker that provides HI-FI sound quality. The MASK8F speaker has a dual-band 8-inch bass driver and a 1-inch silk dome beep.

Whether you’re flying long-haul or relaxing in a café, the WH-1000XM4 headphones deliver our best ever noise cancelling performance, keeping out even more high and mid frequency sounds.

From airplane noise to people’s voices, our WH-1000XM5 wireless headphones with multiple microphone noise cancelling keep out more high and mid frequency sounds than ever. 

SONY XP700 is made up of several speakers, including a front and rear High-efficiency Tweeter and an X-Balanced Speaker Unit, to give you an Omnidirectional Party Sound with a punchy and deep bass and plenty of clarity.

the SONY XG500, With IP66 Water resistant and Dustproof rating this speaker is ready for just about anything. That means that you can listen by the pool, at the park or even at the beach.

SONY WH-XB910N noise cancelling headphones enhance all your low-end frequencies for exceptional bass. A dedicated bass duct on the headphone housing and increased air-tightness between the driver units and eardrums help to create precise, punchy rhythms that lift every track. Yet these wireless headphones also maintain vocal clarity for a wonderfully rich, well-rounded listening experience.

SONY WF-L900, The RingBuds ring-type headset perfectly combines a wide range of functions, allowing you to always hear phone calls, play music and other online content, and clearly hear the sounds of the surroundings without feeling anything in your ear. The small and lightweight headphones fit snugly in your ear, so you can wear them comfortably for hours and not miss anything important.

The SONY WF-C500 is a compact wireless headset. Combining high-quality sound with long battery life, adjustable equalizer, ease of use and moisture resistance, you'll get everything you need to enjoy your music wherever you are.

SONY LSPX-S3 Advanced Vertical Drive Technology uses three Actuators to tap the end of the organic glass, which vibrates to help the spread the sound in every direction.

SONY MDR-RF895RK over-the-ear wireless headphones are designed for use with a TV. These headphones have a built-in noise isolation system for clearer sound quality and automatic adjustment for high transmission quality.

SONY MDR-RF855RK wireless over-ear headphones are designed to connect to a TV. MDR-RF855RK headphone speakers deliver both powerful and smooth sound at the same time. Design ensures easy and comfortable use. 

SONY WH-CH510 lightweight on-ear wireless headphones that connects via Bluetooth. Thanks to the built-in microphone, you can answer calls hands-free without taking the phone out of your pocket.

SONY MDR-RF811RK over-ear wireless headphones for your TV. These headphones are foldable, which makes them easy to use. MDR-RF811RK headphones deliver strong and smooth sound quality.

SONY WI-C310 in-ear wireless headphones deliver expressed bass and great sound performance. These headphones can be used in hands-free mode to answer calls using the multi-function button.

The SONY MDR-ZX310AP is a lightweight and comfortable design on-ear headphones. The ear pads of these headphones are suitable for comfortable use. The MDR-ZX310AP headphones have a built-in microphone that allows them to be used in hands-free mode.

The SONY MDR-ZX310 is a lightweight and comfortable design on-ear headphones that delivers good quality audio. The ear pads of these headphones are suitable for comfortable use.

The SONY MDR-ZX110AP on-ear headphones have built-in neodymium magnets that provide power for strong sound. The ear pads of these headphones are suitable for comfortable use.

SONY MDR-EX110AP is a lightweight and comfortable in-ear headphones. These headphones have built-in neodymium magnets and are great for sports.

APART ZONE4 is a preamplifier that allows you to control 4 stereo zones. The ZONE4 can be controlled from the front panel (with digital display) via the RS232 connector.

APART PCR3000RMKIII is a professional multi-source CD / USB / SD card media player with integrated FM RDS and DAB + receiver. In addition, the player now has an internal Bluetooth receiver that can be connected to any music source, smartphone or computer equipped with a Bluetooth connection.

APART PC1000RMKII is a professional multi-source CD / USB / SD card media player.

There is an operation switch on the back of the player to choose between Auto Play and Cue. When the PC1000RMKII is in auto play mode, the player always starts playing automatically when it is turned on. Cue mode will wait for the play command after turning on. This feature allows you to select a song without playing it automatically.

The APART MA65 is a compact 100 volt mixing amplifier. This amplifier can be the basis for many small installations where you need to perform the functions of a background music and notification system.

The APART MA60 is a compact 9 1/2 inch mixing amplifier. This amplifier is both easy to install and easy to use.

The APART MA30 is a compact 9 1/2 inch mixing amplifier. This amplifier is both easy to install and easy to use.

APART MA240 is a mixing amplifier, which is also a 100V system. This amplifier is both easy to install and easy to use.

APART MA120 is a mixing amplifier, which is also a 100V system. The amplifier has a modern design and is easy to use. The MA120 amplifier is also easy to install.

The APART REVAMP8250 is a professional 8-channel power amplifier. The amplifier has a built-in variable speed cooling fan that keeps the unit cool at all times. The REVAMP8250 amplifier is easy to install.

The APART REVAMP4240T is a professional 4-channel digital power amplifier. This amplifier has a variable speed cooling fan that is activated only in emergencies.

The APART REVAMP4120T is a professional 4-channel digital power amplifier. This amplifier has a variable speed cooling fan that is activated only in emergencies.

The APART REVAMP4100 is a professional digital four-channel amplifier with high-performance Class D amplifier modules inside.

APART REVAMP2600 is a professional two-channel power amplifier. The internal signal processor operates with a single button on the back of the device to select the operating mode. This amplifier is a multifunctional tool that is perfect for places that require a lot of energy in two different areas, such as fitness centers.

The APART REVAMP2250 is a professional two-channel digital power amplifier.

The APART REVAMP2150 is a professional two-channel digital power amplifier. This amplifier is cooled by convection without built-in fans, which means that the amplifier is completely noise-free and dust-free at all times.

The APART REVAMP2120T is a dual-channel digital power amplifier. This amplifier is without built-in fans, so the amplifier is always completely free of noise and dust.

The APART REVAMP2060T is a professional two-channel digital power amplifier. This amplifier is easy to install. The REVAMP2060T amplifier does not have a fan, so it operates quietly and does not accumulate dust.

The APART REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 100 watts output power.

Another smart feature of the REVAMP1680 is the standby power supply with multiple auto on / off options. You can switch the device on or off using the audio sensor.

The APART REVAMP1120T is a single channel professional power amplifier. This amplifier does not have a fan, so it is quiet. The REVAMP1120T amplifier is easy to install.

The APART PA240P is a fully equipped 240 watt DC power amplifier. It is a device designed for larger professional audio installations.

The APART PA2240BP is a 2-channel 100 volt power amplifier. It can be configured as a 2-channel amplifier (2 x 240 watts) or it can be connected to a 1 x 480 watt power amplifier if you need to run a large band up to 480 watts.

APART CHAMP-4 is a universal power amplifier. There is no fan inside the CHAMP-4, which means that the amplifier runs very quietly and is always dust-free.

APART PREZONE2 is a multifunctional stereo preamplifier that allows you to independently control the selection and volume of music sources in 2 stereo zones. This allows you to easily mix 2 microphone levels with any of the 4 music sources. PREZONE2 features make it suitable for almost all professional audio installations.

The PREZONE2 preamplifier is easy to install.

APART PREZONE1 is a multifunctional stereo preamplifier that allows you to independently control the volume in 2 stereo zones. This allows you to easily mix 2 microphone levels with any of the 4 music sources. The PREZONE1's preamp features make it suitable for almost any professional audio installation.

The PREZONE1 preamplifier is easy to install.

The APART ACPR audio control panel has an input for SDQ5PIR speakers. The ACPR audio control panel has a line input on the back to the Euroblock connectors and one 3.2 mm stereo input on the front panel. This rear line input is used when no jack is inserted in the front panel jack connector. Inserting the jack automatically disables rear line input.

The APART ACPL audio control panel has an input for SDQ5PIR speakers. The ACPL has a brushed aluminum front. The LED on the ACPL indicates the power status of the active speakers. The connection to the active speaker is made with a CAT5 cable, which also takes care of the current.

The APART D-ALINP is a wall-mounted audio control panel that allows you to connect a music source and / or a dynamic microphone. The connected music source and microphone have individual volume control.

The built-in microphone amplifier and high-quality input transformer guarantee excellent audio quality.

APART ALINP is a wall-mounted audio control panel. ALINP allows you to connect a music source and / or a dynamic microphone. The connected music source and microphone have individual volume control.

The built-in microphone amplifier and high-quality input transformer guarantee excellent audio quality.

The APART ZONE4R is a multifunctional 4-zone preamplifier with a remote control. The control panel offers music level control, source selection and microphone mixing level control. The clear digital display makes it easy to monitor the operation of the device.

The APART DIWAC wall-mounted audio control unit is ideal for controlling AUDIOCONTROL12.8 in any room. The wall mount audio control unit is programmable via the host unit's graphical installer interface to provide the required functionality.

The APART D-DIWAC wall-mounted audio control unit is ideal for controlling AUDIOCONTROL12.8 and AUDIOSYSTEM8.8 in any room. D-DIWAC is configured as an audio control unit with “Source Select” and “Volume Control” buttons.

The APART D-VOL60 is a 70 volt volume control device. It can handle up to 60 watts of current and is very durable. The D-VOL60 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART D-VOL30 is a 70 volt volume control device. It can handle up to 30 watts of power and is very durable. The D-VOL30 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART D-VOL120 is a 70 volt volume control device. It can handle up to 120 watts of power and is very durable. The D-VOL120 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART E-VOLST is a 4-ohm low-resistance stereo volume control capable of delivering up to 2 x 40 watts of power.

The APART E-VOL60 is a 100 volt volume control device. It can handle up to 60 watts of power. The E-VOL60 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART E-VOL40 is a 100-volt volume control device capable of handling up to 40 watts of current. The E-VOL40 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART E-VOL20 is a 100 volt volume control device. It can handle up to 20 watts of power and is very durable. The E-VOL20 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART E-VOL120 is a 100-volt volume control device capable of operating at up to 120 watts. The E-VOL120 is designed to process 24V priority signals. This means that you can always receive a notification even in areas where the local volume control is in the OFF position.

The APART EN-MPBD5T10 has 2 x high performance full range 5 1/4 inch bass drivers. This speaker provides background music and alarm playback features.

The EN-MPBD5T10 is also a 100V system with multiple power modes (10 - 6 - 3 - 1.5 watts).

The APART EN-MP5T20 has 2 x high-performance full-range bass drivers. This speaker provides background music and alarm playback.

The EN-MP5T20 is also a 100V system with multiple power modes (20 - 15 - 10 - 5 watts).

APART EN-H15 is a trumpet made of UV-resistant material. The EN-H15 speaker is also a 100V system with several power modes (15 - 7.5 - 3.75 - 1.87 watts).

APART EN-H10 is a trumpet made of UV-resistant material. This speaker is intended for both indoor and outdoor use.

The EN-H10 also has a 100V system with multiple power modes (0 - 5 - 2.5 - 1.25 watts).

The APART EN-SMS6T6 is a surface-mounted speaker with a 6 1/2 inch bass driver. This speaker provides excellent sound quality.

The EN-SMS6T6 also has a 100V system with multiple power modes (6 - 3 - 1.5 watts).

The APART EN-SMS6MT6 is a surface-mounted speaker with a 6 1/2 inch bass driver. This speaker provides excellent sound quality.

The EN-SMS6MT6 also has a 100V system with multiple power modes (6 - 3 - 1.5 watts).

The APART EN-SM6T10 is a surface-mounted speaker with a 6 1/2 inch bass driver. This speaker provides excellent sound quality.

The EN-SM6T10 also has a 100V system with multiple power modes (10 - 6 - 3 - 1.5 watts).

The APART EN-SPH6T20 has a 6 1/2 inch bass driver. This speaker is also a 100V system with several power modes (20 - 15 - 10 - 5 - 2.5 watts).

The APART EN-SPH5T16 has a 5 1/4 inch bass driver. The EN-SPH5T16 speaker provides high sound pressure levels and a balanced frequency response.

The EN-SPH5T16 is also a 100V system with multiple power modes (16 - 8 - 4 watts).

The APART EN-CMX6T10 ceiling-mounted speaker has a dual-band 6 1/2-inch bass driver. Skanda provides background music and alarm playback features.

The EN-CMX6T10 is also a 100V system with multiple power modes (10 - 6 - 3 - 1.5 watts).

The APART EN-CM6T6 ceiling-mounted speaker has a 6 1/2 inch bass driver. Skanda provides background music and alarm playback features.

The EN-CM6T6 is also a 100V system with multiple power modes (6 - 3 - 1.5 watts).

The APART EN-CM5T6 ceiling-mounted speaker has a 5 1/4 inch bass driver. The EN-CM5T6 speaker provides background music and alarm playback functions.

The EN-CM5T6 is also a 100V system with multiple power modes (6 - 3 - 1.5 watts).

The APART MPLT62 trumpet features a dual-band 6 1/2-inch bass driver and a 1-inch beep. The speaker provides high-quality sound performance. The MPLT62 speaker performs the function of an alarm system and background music playback.

The MPLT62 speaker is also a 100V system with multiple power modes (62 - 32 - 16 - 8 watts).